SKU:RB-02S101 RTC時鐘模塊
來自ALSROBOT WiKi
目錄 |
產品概述
RTC 時鐘模塊是一款低功耗，具有 56 字節非失性 RAM 的全 BCD 碼時鐘日歷實時時鐘模塊，芯片可以提供秒，分，小時等信息，每一個月的天數能自動調整。并且有閏年補償功能。AM/PM 標志位決定時鐘工作于 24 小時或 12 小時模式，芯片有一個內置的電源感應電路，具有掉電檢測和電池切換功能。當單片機斷電情況下，可以通過一個電池讓單片機項目時間保持記錄，完善的數據記錄。
規格參數
- 產品貨號：RB-02S101
- 工作電壓：DC 5V
- 主控芯片：DS1307
- 晶振頻率：32.768 KHz
- 工作溫度范圍：0°C to +70°C
- 接口類型：IIC 通信接口
- 配套電池型號：3V CR1220 紐扣電池
- 固定孔：4個 * M3
- 產品尺寸：45mm * 25mm
- 產品尺寸圖：
接口定義
RTC時鐘模塊引腳定義：
- SDA：I2C 數據引腳
- SCK：I2C 時鐘引腳
- +：電源(VCC)
- -：地(GND)
使用方法1（Arduino 控制器）
使用硬件
- Arduino UNO 控制器
- RTC 時鐘模塊
- USB 數據線
- 杜邦線若干
硬件連接
Arduino_code_1
#include <Wire.h>
#include "RTClib.h"
RTC_DS1307 rtc;
char daysOfTheWeek[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"};
void setup () {
Serial.begin(57600);
if (! rtc.begin()) {
Serial.println("Couldn't find RTC");
while (1);
}
if (! rtc.isrunning()) {
Serial.println("RTC is NOT running!");
rtc.adjust(DateTime(F(__DATE__), F(__TIME__))); //獲取電腦的系統時間
// rtc.adjust(DateTime(2017, 4, 2, 13, 57, 0));
}
}
void loop () {
DateTime now = rtc.now();
Serial.print(now.year(), DEC);
Serial.print('/');
Serial.print(now.month(), DEC);
Serial.print('/');
Serial.print(now.day(), DEC);
Serial.print(" (");
Serial.print(daysOfTheWeek[now.dayOfTheWeek()]);
Serial.print(") ");
Serial.print(now.hour(), DEC);
Serial.print(':');
Serial.print(now.minute(), DEC);
Serial.print(':');
Serial.print(now.second(), DEC);
Serial.println();
delay(3000);
}
程序效果
使用方法2（Arduino 控制器）
使用硬件
- Arduino UNO R3 控制器 * 1 個
- V5.0 傳感器擴展板 * 1 個
- 四位七段數碼管 * 1 個
- RTC 時鐘模塊 * 1 個
- 傳感器連接線若干
硬件連接
Arduino_code_2
#include <TimerOne.h>
#include "TM1637.h"
#include <Wire.h>
#include "RTClib.h"
#define ON 1
#define OFF 0
RTC_DS1307 rtc;
char daysOfTheWeek[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"};
int8_t TimeDisp[] = {0x00,0x00,0x00,0x00};
unsigned char ClockPoint = 1;
unsigned char Update;
unsigned char minute = 0;
unsigned char hour = 12;
int stem,val;
#define CLK 5
#define DIO 4
TM1637 tm1637(CLK,DIO);
void setup()
{
tm1637.set();
tm1637.init();
Timer1.initialize(500000);
Timer1.attachInterrupt(TimingISR);
Serial.begin(57600);
if (! rtc.begin()) {
Serial.println("Couldn't find RTC");
while (1);
}
if (! rtc.isrunning()) {
Serial.println("RTC is NOT running!");
rtc.adjust(DateTime(F(__DATE__), F(__TIME__))); //獲取電腦的系統時間
// rtc.adjust(DateTime(2017, 4, 2, 13, 57, 0));
}
}
void loop()
{
DateTime now = rtc.now();
if(Update == ON)
{
TimeUpdate();
tm1637.display(TimeDisp);
}
stem = now.hour();
val = now.minute();
}
void TimingISR()
{
ClockPoint = (~ClockPoint) & 0x01;
Update = ON;
}
void TimeUpdate(void)
{
if(ClockPoint)tm1637.point(POINT_ON);
else tm1637.point(POINT_OFF);
TimeDisp[0] = stem/ 10;
TimeDisp[1] = stem % 10;
TimeDisp[2] = val / 10;
TimeDisp[3] = val % 10;
}
程序效果
數碼管實時電子時鐘。
產品相關推薦
資料下載
例程下載鏈接： https://pan.baidu.com/s/17MEoniYbgygkhcAB5iAqSQ 提取碼：tsyj
產品購買地址
周邊產品推薦
串行1602液晶顯示模塊
1602液晶擴展板 v2.0 Arduino LCD 1602 Keypad Shield
Arduino四位七段數碼管
